Media Library / Images

Alternative fuels: HVO (hydrotreated vegetable oil) and E 85 (gasoline with up to 85% ethanol)

ZVA Slimline 2, ZVA Slimline 2 GR

Oasis company building

Elaflon Plus FEP 25

Boat refuelling, ZVA 25

Latvia

Oasis BV708, 1" ball valves, isolation valves, CNG trailer loading

Oasis DMI Dispenser Manifold for CNG

Rubber Expansion Joint ERV-GS HNBR 80.16

YELLOW STEEL HNBR expansion joints for petroleum based products, DIN EN fuels up to 50 % aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Very good aging, weathering and ozone resistance. Temperature range (depending on medium) - 35° C up to + 100° C, temporarily up to + 120° C. Fire resistant to ISO 15540 up 30 min. at + 800° C. Electrically dissipative.

VB 50 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Hose assembly for petrol stations

Standard hose SL 16

ELAFLEX Hamburg, marking tested hose assemblies

Polypal Clean, MX 50 SS

Aljac Closed Circuit Sampler (CCS)

Hydrant-dispenser

ZVG 2 ACME nozzle for L.P. Gas / Autogas

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

Storz Safety Couplings Type SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

LPG Autogas dispenser, ZVG 2 ACME nozzle, LPG 16 dispensing hose

Unloading chemical road tanker

Solvapal hose assembly with DDC Dry Disconnect Couplings

Tank container filling coupling: MK 80-32 SS with VB 80 SS

MK 80-32° coupling with bent lever. For any application it should be checked that the lever can be arrested as shown even if there is tight space. Elaflex offers bent levers for all MK couplers.

Nozzle boot NB-ZVF 50

for ZVF 50 Oberflügel-Zapfventile

HD-C, airport depot

Underwing couplings with HD-C hoses for bottom loading of aircraft refuellers at airport depot

Adapters / couplers for vehicles fighting dangerous goods incidents:

Plugs and Caps MB 50 SS/Vi, VB 50 SS, VB 100 SS, BK 2" SS/Vi, BK 3" SS/Vi

MC 38-11/2" Ms

Female hose coupling for hoses, brass, with Spannloc clamps

AMKC 50 Ms

'Camlock' brass steel coupler to EN 14420 - 7 with hose tail and Spannloc clamps

ELAFLEX Hamburg, narrow aisle stock for small parts

Heating oil delivery: ZV 500 nozzle, HD reel hose - up to 80 mtr length

Fuel delivery at the petrol station

LTW 75 fuel delivery hose, MKX 80 female TW coupler

Underwing refuelling, HD-C

Aircraft dispenser, pit

Elapharm EPH 25 with EN 1092-1flange fitting, free of dead spaces

Composite hose assemblies with 'COPSAFE' , suitable for COP systems (cross-over prevention)

electrical conductivity

DAC-V 65, DAC-M 65

Aircraft refueller , Dry Aircraft Coupling to ISO 45 for bottom loading - with and without sight glass

LNG bunkering / loading of a ship

MannTek DCC Dry Cryogenic Coupling

ELAFLEX Hamburg

Nozzle stock, ZVA Slimline 2 GR