Media Library / Images

Tank storage: manifold with DDC Dry Disconnect Couplings, TW hose assemblies

Swivel EA 075 A f. ZVA AdBlue HV

old design

ZVG 2 K (Korea)

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

Oasis CV Heavy Duty Check Valves for CNG

ContiTech Production ERV

Vulcanisation

FGN 2 SS

Flange with male thread, stainless steel

ERV-R 100.16

RED BAND Rubber Expansion Joint for water, drinking water (DVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature range - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

Lube Flow Modul for IBC loading/unloading

FWS 50 PP, DDC-M 50, HD 50, ZV 400, ERV-G 50 Special Type

ZVA Slimline 2 GR, guard no 3, red, Coax hose assembly with Colour Sleeve red

Tecnopal 38

Chemical hose to EN 12115 for alkalis, acids, solutions, alcohols, polar solvents, acetates, aldehydes, esters, ketones, hot water, hot air (not oily).

Customer protected special design ZVA Slimline 2 nozzle

Nozzle boot NB-ZVF 50

for ZVF 50 Oberflügel-Zapfventile

ERV-G

Pump station for fuels

Rubber Expansion Joint ERV-G LT 80.16

YELLOW BAND LT expansion joints designed for low temperature applications for standard-conform petroleum based products, e.g. diesel, heating oil up to + 90° C, aviation fuels, petroleum up to + 60° C and gasoline up to + 40° C. Temperature (depending on medium) range - 40° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

ZVA Slimline 2 GR, hand

scuffguard and product sleeve green, Slimline hose assembly with Colour Sleeve green

Production MannTek, Sweden

Elaflex Hiby Tanktechnik, Production Plettenberg / Germany

Sand casting: melting

Section view of a CSB 21 COAX Safety Break

Rail tanker unloading of petroleum based products

LTW hose assemblies; Poland

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

L.P.Gas road tanker

Heating oil delivery: HD 38 reel hose

Compact Line HD 50, Hose Reel Spring Rewind

FEP 5O, MannTek DDC-M 5O SS

Elaflex Hamburg

ERV, assembling vacuum support spiral VSD

Unloading chemical road tanker

UTS hose assembly

Safety Swivel Break

SSB 25

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

Elaflex Hamburg, stock bellows

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

ZVA Slimline 2 and ZVA Slimline 2 GR, Slimline hose assemblies

Petrol station, Indonesia