Media Library / Images

ERV-G LT 100 TW

for low temperature applications

FFC 50.16 St

Fixed flange hose fitting of steel, with Spannloc clamps

Ship bunkering

FHD hose assembly, flange connection

Hose assemblies for the chemical industry

ERV-GR TA, UTL with DDC, FXD with male thread, Elaflon Plus FEP with foodstuff fitting, Elaflon PTFE with female thrad

Construction site / on site refuelling:

ZVA 500 manual bulk nozzle

Elaflon PTFE hose asemblies

Rubber Expansion Joint ERV-G LT 80.16

YELLOW BAND LT expansion joints designed for low temperature applications for standard-conform petroleum based products, e.g. diesel, heating oil up to + 90° C, aviation fuels, petroleum up to + 60° C and gasoline up to + 40° C. Temperature (depending on medium) range - 40° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 ACME nozzle

ZVA HV for AdBlue®, SSB 16 SS / BS 16, SL 16 for AdBlue®

Urea solution (DEF, ARLA 32) for trucks: nozzle, Safety Break / Break Sleeve and hose assembly

Oasis Engineering Ltd, New Zealand (CNG refuelling products)

Testing

HD 50 C, Carter Underwing Nozzle, Aljac Lanyard Reel

DDC-V 50 SS F

MannTek Dry Disconnect Coupling, DN 50, stainless steel, with flange connection

Unloading petroleum products at the service station (road tanker to UST)

LG 3" hose assembly for gravity discharge, LTW 50 hose assembly for vapour balance

Graphic Drip Stop spout for ZVA Slimline 2 nozzles

VB 100 ADR Al with pressure relief

Plug for MK 100
• Meets the ADR requirements
• Enhanced safety and protects the environment
• Easy, user friendly operation

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

LPG Autogas Adapter (filler inlet) DISH

"Italian" claw coupling

ELAFLEX Hamburg

Assembling COAX hose SL 21, with inner vapour hose, for vapour recovery Stage II

PAL hose assemblies:

PCD 32 / RMC-SS, Butapal 32 / ACMX, Polypal Plus 50 / SFC 50 SS, Tecnopal 38 / MKX-SS, Pyropal 38 / MC38

ERV-G rubber expansion joint

ERV-G AF DN 80, with TW flanges

FGN 2 SS

Flange with male thread, stainless steel

Slimline 21 hose assembly with non reattacheable female coupling M 21-1" NR

Hose assembly for petrol stations

COAX hose SL 21, with inner vapour hose, for vapour recovery Stage II

UTL 50 universal hose with MannTek Dry Disconnect Coupling DDC-M 65 - 21/2" Ms

ERV-R 200x175.16 ZS 4

Red Band Rubber Expansion Joint, special length 175 mm, with "ZS" limiter (tie rods with outer limitation in rubber bushings)

ARK 19 Safety Break (Hose Break) at LPG Autogas dispenser

Reassembly on site without tools

Stainless steel Hose Reel with pneumatic rewind system, HD 50

AdBlue® urea solution, road tanker:

DDC-M 50 Dry Disconnect Coupling, UTL 50 hose assembly on reel

Heating oil delivery: HD 38 reel hose

Flame protection cover FSH for ERV rubber expansion joints