Media Library / Images

GasGuard LPG nozzle GG30

4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

LPG Autogas Adapter (filler inlet) EURO

Push-In-Coupling EN 13670

Production plastic parts

Injection Molding

ERV-G 80.TW

Yellow Band rubber expansion joint with TW flanges

Elaflon Plus FEP hose assemblies:

Bulk filling of powders

LH2 Refuelling

'N-LH2' nozzle for LH2 truck refuelling of cryogenic hydrogen

Overwing refuelling ZVA 25

Safety Swivel Break

SSB 16.0

V 16-1" cr

Male ferrule hose coupling EN 14424, reusable. Slimline 16 hose, blue.

ZVF 50 JET

ZVA 25 for aircraft refuelling

red plastic cover (scuffguard), decal (sticker) AVGAS, dust cap and ground cable assembly

LTW 75 hose assembly

with MannTek DDC Dry Disconnect Coupling; use eg. as connecting hose for heating oil trailers

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

L.P. Gas road tanker: long hose reel, LPG 32 and LPG 25 hose assemblies

ERV-G Yellow Band rubber expansion joint, installation underneath a road tanker

ERV Fire Resistance test

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

ELAFLEX Hamburg

ERV assembling

GasGuard LPG nozzle GG1DN

suited for use by the general public and untrained personell (self service). Patented dual nose piece for added safety. Low lever actuation force. Gas release volume on valve closure: 1.7 cm³.

ZV 19.1 TD

ZV 19 manually operated dispensing nozzle, DN 19 (3/4"), up to 100 ltr./min. Special version for chemicals/solvents with PTFE seals.

ERV TA:

ERV with white PTFE lining. Used when the chemical resistance of the chosen ERV type is insufficient. Resistant to all commonly used liquids. Electrically isolating, therefore not suitable for flammable liquids in Ex-Zones. Admissible working temperature of expansion joint has to be observed. For maximum pressure of 6 bar – not suitable for vacuum.

ZV 500

High performance manual operated dispensing nozzle with 'TW' coupling MK 50 for Diesel, fuel, oils, petroleum

Production plastic precision parts

Pipe with AVKI 50 SS, hose assembly with AVKX 50 SS

'Camlock' stainless steel female and male coupling to EN 14420 - 7

Accessories and spare parts: Ground cable assembly, dust cap assemblies, spouts, strainer

ER 339, ER 494, ER 495, ER 587 JET PTL, EKG 1200, GKG 19, GKG 32, GKG 38-J, ES336.1

ERV VSR:

ERV with vacuum support ring. Ring of AISI 316 Ti , used when the vacuum resistance of the chosen ERV is not sufficient.

LNG Refuelling

LNG Safety Break SB-LNG VL SB-LNG FL

Polypal Oil 75

Universal chemical hose special type with petroleum resistant cover of Chloroprene (CR). Suitable e.g. as gantry hose (road tanker loading).

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 EURO (UL listed)

ZV 500 for chemials

Bulk filling of Methylene Chloride