Media Library / Images

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Contour check

Urea solution filling of a car:

ZVA LV for AdBlue^®, Slimline 16 for AdBlue^® (blue cover)

MB 80 SSE

TW dust cap of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ZVA Slimline 2 GR

Automatic nozzle with vapour recovery, flowrate up to 45 l / min.

Universal hoses UTL with DDC Dry Disconnect Couplings

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

DCC Dry Cryogenic Coupling for LNG

Coupling process

ERV-OR

"Orange Band" Rubber Expansion Joints, road tanker

Unloading petroleum products at the service station (road tanker to UST)

LG hose assembly for gravity discharge

MC 100 SS female threaded hose coupling with Spannloc clamps

with universal hose UTL 100

MC 75-3" Ms

Female hose coupling for hoses, brass, with Spannloc clamps

ROTEX 80.16 ZS 2

Tied Flanges – Type ZS, Tie rods with outer limitation in rubber bushings

Adapters / couplers for vehicles fighting dangerous goods incidents:

Plugs and Caps MB 50 SS/Vi, VB 50 SS, VB 100 SS, BK 2" SS/Vi, BK 3" SS/Vi

Heating oil delivery: HD reel hose, bulk nozzle

Cabinet of road tanker:

MK 80-32 TW coupler with bent lever, VB 80 P dust plug

FFBV 80, DAC-V 65, DAC-K 2 1/2" Al

MannTek Full Flow Ballvalves (FFBV), one way

Bonding reel grey, high visibility bonding cable with clamp

AMKC 50 Ms

'Camlock' brass steel coupler to EN 14420 - 7 with hose tail and Spannloc clamps

Elaflex Pacific Pty., Australia: workshop

AKD 75 Hy

CouplingSeal CSM

Slimline 16 blue

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

ZH 50 nozzle with MK50SS + HD hose assembly, DDC-V 80 Ms with cap, MK 80 Ms with VB 80 P

GasGuard LPG nozzle GG20

With long connector nut to access 'hard to reach' fill points. Economic type for industrial refueling / attended refueling. Release volume on valve closure: 1,9 cm³.

Loading Brine (salt solutíon for winter service): CHS hose asssembly, DDC Dry Disconnect Coupling

Elaflex hoses

TW, PTFE, LPG, FEP, UTS, PCS, CHS

ERV-R

"Red Band" Rubber Expansion Joints/ water treatment

ZVG 2 K (Korea)

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

Camlock Cam Locking Coupling AMK 50 Ms (brass)

Oasis HC208 Quick Coupler, CNG loading

ZVG 2 DISH nozzle for L.P. Gas / Autogas, LPG 16 hose assembly