Images

Cargo loading of a tanker with petroleum based products; FHD hose assembly with new longitudinal stripe to avoid torsion

Picture courtesy of Macoil International, Gibraltar

ZVG 2 K (Korea)

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

TS 80 lockable cap vor VK 80 couplings

AMK 25 EASY

EASYLOC ('Camlock' stainless steel coupler to EN 14420 – 7 for male adapters AVK with captive seal) with lever arrest

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

Elaflon Plus FEP hose assemblies, SBC Safety Breakaway Couplings

RS 2 x 2 Ms

Reducer Female/Male

Overwing refuelling ZVA 25

Production MannTek, Sweden

LNG ship bunkering

DCC 100 Dry Cryogenic Coupling, CBC 100 PERC Cryogenic Breakaway Coupling

ZVA Slimline 2 nozzles special version, Slimline dispensing hoses blue / red

Thailand

ELAFLEX Hamburg

ERV assembling

LNG bunkering / loading of a ship

MannTek DCC Dry Cryogenic Coupling

ZVA 25

HIFLO-Automatic nozzle DN 25 (1"), flowrate up to 140 litres/min.

Movable Storage Hose Reel with manual rewind system white, HD 38, ZV 400

customised

Nozzle boot NB-ZVF 50

for ZVF 50 Oberflügel-Zapfventile

Elaflon PTFE 38 hose assembly with RMC 38 SS foodstuff fitting

Ship bunkering with LNG

CBC Cryogenic Breakaway Coupling from MannTek and hose assembly for cryogenic media

GasGuard LPG nozzle GG30

LPGas nozzle with Bayonet connection according to EN 12806 - 2003 for the filling of commercial and passenger Autogas vehicles as well as mobile and small stationary storage tanks with propane and butane. New : 4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

V 16-1" cr

Male ferrule hose coupling EN 14424, reusable. Slimline 16 hose, black.

ROTEX 200.10 SS TAS

Rubber Expansion Joint with PTFE lining and PTFE vakuum support ring

ZVA Slimline TD

Automatic nozzle with special seals, for solvents / chemicals

FF-St 80 SSE

Fixed flange hose tail for assembling with Spannfix or Spannloc. Material: stainless steel with universally resistant PFA coating (red)

ZVA Slimline 2 and ZVA Slimline 2 GR with sight glasses, Slimline hose assemblies

Petrol station, Czech Republic

ERV-GR 250.10 SS TA

Green Band Rubber Expansion Joint with PTFE lining

ERV-GR

Grinding oil

SFX 50.16

hose flange; hose tail and swiveling flange of steel, Spannfix clams

Hose Assemblies with Flange - Elapac seals

On board of an aircraft refueller: TW-hose, Spannloc flanged coupling; flange seal: Elapac.

RS 4 x 51/2 SS