Media Library / Images

UTS 200 hose assembly in chemical plant

Italy

ZVA Slimline 2 GR, hand

scuffguard and product sleeve green, Slimline hose assembly with Colour Sleeve green

Safety Swivel Break SSB 16 SS of stainless steel f. ZVA HV for AdBlue®

old design

Connection UTS hose assembly

Belgium

CSB 21 Coax Safety Break: Separation

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Aljac bonding reel

Airfield refueller

Fuel Grade Identification to EN 16942 standard, direct print on product badges for ZVA Nozzles

Picture 2

Slimline 19 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

Oasis BV706 ball valves with Code 62 flange and SAE connection, for CNG

Slimline 16 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

Ship bunkering

FHD hose assemblies, Port of Gothenburg / Sweden

Slimline SF 19 black

Quality petrol pump hose for gasoline and diesel fuels. Special type 'sulphur-free'. Sulphur content of fuel does not increase, even if medium remains with the hose for a longer time, see Information 12. 15 and catalogue page 111c.

Cabinet of road tanker:

MK 80 with VB 80 ADR SS (plug with pressure relief)

ELAFLEX Hamburg

Stock intake quality check – measurements

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

Oasis FV103 with NC203 P36, Light Duty Fill Valve and Transit Nozzle for CNG

MannTek DGC DryGasCoupling for L.P. Gas

DGC-V 80 F, DDC-K 3" NBR

Oasis TH Tank Head Valve, for CNG

Adapter: VK 100 x MK 80-32°

The lever is bent to enable lever arrest (safe position when coupled)

ELAPHARM Type EPH-OHM G

electrically conductive 'OHM/T', with light grey cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, black PTFE liner.

LPG road tanker loading with MannTek DGC Dry Gas Couplings

ZVF 50 JET for aircraft refuelling

Hose Reel with hydraulic rewind system orange, LPG 32, DGC-M 50

90° Bend Al

90° bend of aluminium with pipe thread (EN ISO 228 with flat sealing surface). Available in sizes G 2" and 3". On request with TW couplings.

ERV-CR 100 (4")

'CR' Rubber Expansion Joint for cold and warm water / ship engine room

Rail tanker unloading of petroleum based products

Plant side: FWS PP St/St composite hoses, SG 3" Sight Glasses

ZVA_AdBlue_LV_2-Stufen-Anschlag_Step1

Use - 1/2

Elaflon PTFE hose asemblies

ELAFLEX Hamburg

ZVA Slimline 2 GR