Media Library / Images

Cargo loading of a tanker with petroleum based products; FHD hose assembly

Picture courtesy of Macoil International, Gibraltar

ZVA Slimline 2 for aircraft refuelling

black plastic cover (scuffguard), Sight Glass, dust cap and ground cable assembly

IBC unloading

Female hose coupling MC 38-S60 SS (with Spannfix clamps). Direct connection of a hose assembly to the IBC.

ELAFLEX Hamburg

Hose assemblies, marking after testing on the fitting

Cargo loading of a tanker with petroleum based products; FHD hose assembly with new longitudinal stripe to avoid torsion

Picture courtesy of Macoil International, Gibraltar

Cabinet of road tanker:

MK 80-32 TW coupler with bent lever, VB 80 P dust plug

ZVF 50 SIC (Screw In Connection), strainier inspection

Construction of ELAFLEX composite hoses type FWS

Sectioned view of a composite hose

Universal hose assembly UTD 19 with MC 19 SS

BD 63 Hose Beads

to EI 1522 standard - notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

Oasis 'Priority Panel' with ball valves for CNG refuelling plants

ERV-OR

"Orange Band" Rubber Expansion Joints for L.P. Gas, road tanker

KR 50

bend with VK 50 x MK 50, 60°

ZVA Slimline 2 / ZVA Slimline 2 GR

Petrol station nozzles with and without vapour recovery, hose assemblies

Type PCS 38 (Polypal Clean DN 38 mm)

Simultaneous Refuelling/Filling of Diesel and AdBlue®

Picture 1

Check Valve 350 bar

for Hydrogen

DDC-K ADR:

DDC Dust Caps with Pressure Relief Valve to ADR Requirements. These pressurized dust caps PN 10 of aluminium for DDC male adapters on road tankers are much lighter than the PN 25 versions of stainless steel.

VK 80 - 2" IG Ms

TW male coupling brass, with reduced female BSP connection, one piece adapter (special type)

MC 75-3" Ms

Female hose coupling for hoses, brass, with Spannloc clamps

ZVA 25, bus refuelling

Section view of a DRIP STOP spout

for ZVA Slimline 2 nozzles - stops dripping Diesel

HB 50 ST tar spraying hose

Pressure hose for road construction machines, especially for hot bitumen and heavy heating oil. Temperature range: - 25° C up to + 220° C. Meets EN 13482, Type 2 SB/B (DN 19 and DN 32 analogue).

DDC-M 65-2 1/2" Al

MannTek Dry Disconnect Coupling, aluminium

MK 80-90 SS; MK coupling stainless steel with bent lever 90°

TW coupling with bent lever: For any application it should be checked that the lever can be arrested as shown even if there is tight space. Elaflex offers bent levers for all MK couplers.

RS 2 x 3 SS

Reducer Female/Male

ERV VSD:

ERV with vacuum support spiral. Spiral of AISI 316 Ti, used when the vacuum resistance of the chosen ERV is not sufficient.

SG 1½" Al

Ssight glass for ZVA 32 nozzles, e.g. for aviation refuelling.

Heating oil delivery: ZH 50 nozzle, HD reel hose

RM-St 50 SSE

Female foodstuff threaded hose tail for assembling with Spannfix or Spannloc. Material: stainless steel with universally resistant PFA coating (red)