Media Library / Images

SG 1" 1x0 Al

Sight Glass, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

Elaflon Plus FEP 50

Elaflon Plus FEP hose assemblies, one side open end

up to DN 50 grey cover / from DN 63 black cover

ZVG 2 ACME nozzle for L.P. Gas / Autogas, LPG 16 hose assembly

ELAPHARM Type EPH-OHM G

electrically conductive 'OHM/T', with light grey cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, black PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Oasis FV103 Fill Valve, NC 104 Nozzle Coupler, CNG bus refuelling of small truck

LNG Refuelling

LNG truck refuelling with 'N-LNG' Nozzle coupled to fuel, LNG 25 fill hose assembly with cover, bonding cable

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ERV-R

"Red Band" Rubber Expansion Joints; wastewater pump

TGN 4" Al tank truck flange with threaded nipple, VK 100 Ms male TW coupler, MB 100 Al dust cap, chain

Vehicle refuelling with LPG (L.P. Gas, Autogas)

GasGuard GG20 ACME nozzle

AN 2 SS

Welding nipple stainless steel

CNG Safety Break (Hose Break)

separated

Hose Reel Spring Rewind

HD 25 C, ZVA 25 AF red, GKG 25, EKG 1200

LNG Refuelling

LNG Safety Break for installation on LNG dispensers SB-LNG FL-J

ELAFIX 40

Magnet adapter for installation in filler necks from DN 40. This adapter allows the refilling of urea solution with ZVA HV for AdBlue^®, without the risk of misfillings. Meets ISO 22241-4.

ERV-R 150.16 ZS 2

Red Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

ERV-R 200x175.16 ZS 4

Red Band Rubber Expansion Joint, special length 175 mm, with "ZS" limiter (tie rods with outer limitation in rubber bushings)

ZVF 50 JET overwing refuelling

with HD-C hose assembly

ZVA Slimline 2 GR with Sight Glass SG-COAX

Production MannTek, Sweden

Premium refuelling equipment from ELAFLEX

FFBV 100, FFBV 80

MannTek Full Flow Ballvalves (FFBV), one way

Rubber Expansion Joint ERV-GS HNBR 80.16

YELLOW STEEL HNBR expansion joints for petroleum based products, DIN EN fuels up to 50 % aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Very good aging, weathering and ozone resistance. Temperature range (depending on medium) - 35° C up to + 100° C, temporarily up to + 120° C. Fire resistant to ISO 15540 up 30 min. at + 800° C. Electrically dissipative.

ZVA 25, Slimline hose assembly

Truck refuelling

Camlock Cam Locking hose tail AMK-St 50 Ms and male adapter AVK 50-2" Ms (brass)

Slimline 16 green

Quality dispensing hose for the forecourt

ELAFLEX Hamburg

Stock commisioning system

90° Bend Al

90° bend of aluminium with pipe thread (EN ISO 228 with flat sealing surface). Available in sizes G 2" and 3". On request with TW couplings.

SG 80-TW1 Al

Sight glass with rods, with TW flanges to DIN 28460