Media Library / Images

RMX 32 SS / SS

Spannloc threaded hose coupling with foodstuff thread / Spannloc of stainless steel

ZVG 2 EURO nozzle for L.P. Gas / Autogas

with EA 866 scuffguard black and LPG 16 S hose assembly orange

HD 50 C, HD 10 C

Yellow band aircraft refuelling hose and sensing hose

MannTek DGC DryGasCouplings

with integrated SBC Safety Breakaway Coupling

Production MannTek, Sweden

SMS 19-3/4"

Steam hose couplings of steel to EN 14423. With bolted clamps of hot stamped brass. For saturated steam hoses up to 220° C, compressed air, oxygen, oils up to 25 bar W.P. Hose tail and union nut of steel Zn / Cr.

ERV-R 80.16 ZS 2

Red Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

DDC-M 50-2" SS

MannTek Dry Disconnect Coupling, DN 50, stainless steel

ERV-CR

"CR" Rubber Expansion Joints - ballast water treatment skid

GasGuard LPG nozzle GG20DN

With long connector nut to access 'hard to reach' fill points. "DN": suited for use by the general public and untrained personell (self service). Patented dual nose piece for added safety. Low lever actuation force. Gas release volume on valve closure : 1,7 cm³.

AMKC 50 Ms

'Camlock' brass steel coupler to EN 14420 - 7 with hose tail and Spannloc clamps

IBC loading

MannTek DDC-M 50, FWS 50 PTFE

Swivel EA 075 A f. ZVA HV for AdBlue®

old design

Rail tanker discharge coupling KWK, with elbow DN 80

for damaged / dirty rail tanker or other threaded hose connections. Used e.g. for environmental protection trucks

Universal hose assembly

PCS 75 (Polypal Clean DN 75 mm) with MX 75-3" SS and DDC-M 80-3" SS Dry Disconnect Coupling

HD 10 C sensing hose

Use as sensing hose for aircraft dispensers (hydrant dispensers)

Bonding Reel grey, high visibility bonding cable

Ultra Fast Fill Quick Coupler 350 bar

for Hydrogen

ERV Rubber Expansion Joints

Picture 5

ZVF 25 with EKG and GKG

Manual nozzle DN 25 for aircraft overwing refuelling, with ground cable assembly, dust cap assembly and AVGAS sticker (decal)

Marine bunkering and cargo hoses

ship to shore bunkering

Heating oil delivery: ZV 400 nozzle, HD reel hose

Hose assemblies

for dangerous goods: ELAFLEX quality

Sand casted products to your design

In our modern foundry we can produce complex sand casted aluminium, bronze and gunmetal products to your requirements.

SG 1" 1x0 Al

Sight Glass, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

ZVG 2 EURO

(Push-In-Coupling) to EN 13760. One-handed operation possible.

Bunker boat: HD hose assemblies on reel, ZV 500 nozzle

Hose Reel Spring Rewind, ZVA Slimline 2 blue

HD-C aircraft refuelling hose

HD 50 C F

PSB Pump Safety Break for High Hose Dispensers