Media Library / Images

Oasis FV103 Fill Valve, NC 104 Nozzle Coupler, CNG bus refuelling

Aircraft refuelling

Carter Underwing Nozzle, HD 63 C Neon, ZVF 50 AVGAS, SC 50 Al, HD 50 C, Hose Bead BD 50

ZVA Slimline 2 with reduced spout and Slimline hose

here: for gasoline, use in countries without vapour recovery regulation

Petrol station in Singapore

ZVA Slimline 2 nozzle with Splashguard, SSB 16 Safety Break, Slimline hose assemblies

MK 50 SSE

TW female coupler. Material: stainless steel with universally resistant PFA coating (red)

Slimline 16 green

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

L.P.Gas petrolstation, GG20, Slimline, ZVG 2 EURO UL

Marine bunkering and cargo hoses

ship to shore cargo transfer

ELAFLEX Hamburg

Manufacturing bronze corrugated pipes

ContiTech Production hose

Dispensing hose, removal of TPX coating after vulcanisation

Simultaneous Refuelling/Filling of Diesel and AdBlue®

Picture 3

Lube Flow Modul for IBC loading/unloading

FWS 50 PP, DDC-M 50, HD 50, ZV 400, ERV-G 50 Special Type

GasGuard LPG nozzle GG30: optional Magnet in the guard

For contactless activation of dispensers with reed switch technology

Oasis BV708, 1" ball valves, isolation valves, CNG spheres (tanks)

Terminal / gantry: 'Polypal Oil' hose assemblies for bottom loading of road tankers

Lining UPE - resistant to all petrochemical media, also with high content of aromatics or other aggressive additives; cover CR - oil resistant

ZV 19.1

ZV 19 manually operated dispensing nozzle, DN 19 (3/4"), for diesel, fuel, petroleum and oils (also vegetable oils) up to 100 ltr./min.

SMS 19-3/4"

Steam hose couplings of steel to EN 14423. With bolted clamps of hot stamped brass. For saturated steam hoses up to 220° C, compressed air, oxygen, oils up to 25 bar W.P. Hose tail and union nut of steel Zn / Cr.

Connection road tanker to trailer: LTW hose assembly, DDC Dry Disconnect Coupling

Nozzle boot NB-ZVF 50 SR

for ZVF 50 Oberflügel-Zapfventile, with Spout Retainer

BD 63 Hose Beads

to EI 1522 standard - notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

Type PCS, Polypal Clean

PCS 25, PCS 63, PCS 100

Fluorline EFL 21

Universal pump hose DN 21 for chemicals, petroleum based products, for propane, butane and other L.P. gases, as well as solvents. Ideal for highly sensitive media such as AdBlue^® urea solution. Temperature range - 40° to + 100° C. Burst pressure > 64 bar.

Elapharm EPH 25

ELAPHARM electrically isolating ' I ', blue cover. Corresponds to DIN 26055-3 / EN 16820, Type A. FDA conform. Homogeneous elastomer hose construction with smooth, white Teflon® PTFE liner.

HD-C LT, Low Temperature

LT (Low Temperature) types of our aircraft refuelling hoses are suitable for use in especially cold regions - high flexibility.

M 21-1" cr

Female ferrule hose coupling EN 14424, reuasable. Slimline 21 hose, green.

Ship bunkering

HD hose assembly on dispenser vehicle

Chemopal 50 mW

Chemopal chemical hose DN 50 with helix

DDC-V Dry Disconnect Couplings for various media

tank storage; TW hose assembly

EN 12115 hoses: colour marking

DDC-K ADR:

DDC Dust Caps with Pressure Relief Valve to ADR Requirements. These pressurized dust caps PN 10 of aluminium for DDC male adapters on road tankers are much lighter than the PN 25 versions of stainless steel.