Media Library / Images

ElaSil® Silicone hose

ZAF Coax adapter (splitter valve) at petrol station dispenser

L.P.Gas road tanker

Polypal Clean hose

SBS 250 - marine cargo hoses with built-in nipples

heavy standard bunkering hose to EN 1765, category S 15

SMX 50-2"

Female hose coupling of steel with Spannfix clamps

Rubber Expansion Joint ERV-W 80.16

WHITE BAND expansion joints for foodstuffs, also containing oil and fat. Liner corresponds to Recommendation XXI of BfR and FDA-21CFR 177.2600. Not approved for drinking water. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically non-conductive.

Ship loading with high aromatic content fuel > 50%

UTS 150 hose assembly

Oasis Engineering Ltd, New Zealand (CNG refuelling products)

Production Picture 7

Slimline quality dispensing hose for the forecourt

Fire fighting truck: CHS hose assemblies, ERV-OR Rubber Expansion Joint

Hose assembly for petrol stations

COAX hose SL 21, with inner vapour hose, for vapour recovery Stage II

PSB Pump Safety Break for High Hose Dispensers

Picture shows separation of the Slimline hose assembly after a drive-off accident

ContiTech Production hose

Tank hose after vulcanisation

ZVA Slimline 2 GR, hand

scuffguard and product sleeve green, Slimline hose assembly with Colour Sleeve green

Urea solution filling of a car: ZVA LV for AdBlue®

HD-C, ZVF 50, Refueller

Aircraft refueller, overwing refuelling JET

Production plastic parts

Injection Molding

Ferrule threaded hose coupling M 19-1" Ms

for petrol station dispensing hoses

GasGuard LPG nozzles

and LPG 16 orange hose assemblies for the filling of commercial and passenger Autogas vehicles as well as mobile and small stationary storage tanks with propane and butane.

ZVF 25 for aircraft refuelling

dust cap and ground cable assembly

Composite hose Danoil 7GG, DDC-M Dry Disconnect Coupling, airport depot

HD 100 C NEON, HD 10 C sensing hose

Type HD-C, aviation hose

DDC-K ADR:

DDC Dust Caps with Pressure Relief Valve to ADR Requirements. These pressurized dust caps PN 10 of aluminium for DDC male adapters on road tankers are much lighter than the PN 25 versions of stainless steel.

DN 1" SS

Double nipple stainless steel

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

IBC unloading

Female hose coupling MC 38-S60 SS (with Spannfix clamps) and LMS solvent hose. Direct connection of a hose assembly to the IBC.

AMKC 50 Ms

'Camlock' brass steel coupler to EN 14420 - 7 with hose tail and Spannloc clamps

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Assembling ZVA

Terminal / gantry: TW hose assemblies for bottom loading of road tankers