Media Library / Images

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Assembling ZVA components

DDC-M 100, TW hose assembly

Rail tanker bottom loading with Dry Disconnect Coupling

Safety Swivel Break SSB 16 SS of stainless steel f. ZVA HV for AdBlue®

new design

ELAFLEX Hamburg

Assembling Spannloc hose clamps

Cargo loading / unloading of ship, STW 150, Vapour Line

Italy

GasGuard LPG nozzle GG30

LPGas nozzle with Bayonet connection according to EN 12806 - 2003 for the filling of commercial and passenger Autogas vehicles as well as mobile and small stationary storage tanks with propane and butane. New : 4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ELAFLEX Hamburg

ELAFLEX stock hoses

Oasis 'Priority Panel' with ball valves for CNG refuelling plants

ERV-G AF

Suitable for piping systems of aviation refuelling or dispensing vehicles in accordance to EN ISO 1825/EI 1529. Suitable for all aviation fuels.

ZVA Slimline 2 / ZVA Slimline 2 GR

Petrol station nozzles with and without vapour recovery, hose assemblies

Motorcycle refuelling at the petrol station

ZVA Slimline 2 GR with special short spout

Ship loading with chemicals

UTS 150 hose assembly, ARK-S Safety Break Coupling

VC 75-3" SS / SS

Spannloc threaded hose coupling with BSP male thread / Spannloc of stainless steel

Adapters / couplers for vehicles fighting dangerous goods incidents:

Plugs and Caps MB 50 SS/Vi, VB 50 SS, VB 100 SS, BK 2" SS/Vi, BK 3" SS/Vi

DCC Dry Cryogenic Coupling for LNG

Coupling process

ContiTech Production ERV

manufacturing the blank

Alternative fuels: DME Dimethyl Ester

DGC Dry Gas Coupling, EFL 16 Fluorline hose assembly

ERV Rubber Expansion Joints

Picture 2

TW hose assembly, airport depot

Oasis BV708, 1" ball valves, isolation valves, CNG trailer loading

ELAFLEX Hamburg

Hose assemblies, endoscope inspection hose

MannTek DGC DryGasCouplings for L.P. Gas

DGC-M 80-3", DGC-V 80-3" with DDC-K dust cap

Ship bunkering with LNG

DCC Dry Cryogenic Coupling CBC Cryogenic Breakaway Coupling

ERV-GS

"Yellow Steel" Rubber Expansion Joints / ship engine room of a ferry

ZVA_AdBlue_LV_2-Stufen-Anschlag_Step2_mod

Use - 2/2

ZVF 50 UL 91 / green

Manual aviation fuelling nozzle for overwing service. Flowrate up to 400 ltr. / min. (85 IGM – higher flowrates are possible). Size DN 50. Working pressure PN 10 (140 psi). Temperature range - 40° C up to + 55° C.

M 63 2½" SS, TD 76/63 PTFE, Spannloc SC 63 Al

Hose coupling with female thread, Spannloc aus Aluminium

SG 1" 1x0 Al Propeller

Sight Glass with propelller, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

HB 19 ST tar spraying hose

Pressure hose for road construction machines, especially for hot bitumen and heavy heating oil. Temperature range: - 25° C up to + 220° C. Meets EN 13482, Type 2 SB/B (DN 19 and DN 32 analogue).