Media Library / Images

BD 63 Hose Beads

to EI 1522 standard - notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

MannTek DGC DryGasCoupling for L.P. Gas

DGC-V 80 F, DDC-K 3" NBR

DDC-V 80 F

Dry Disconnect Coupling for Epoxi resin loading - with sensor

ZVA Slimline 2, ZVA Slimline 2 GR (Special type with PowerPerformer)

Composite hose Danoil 7GG, DDC-M Dry Disconnect Coupling, airport depot

ERV-G 100 TW

ERV Rubber Expansion Joints

Picture 1

ERV-R ... ZS

"Red Band" Rubber Expansion Joints with limiters

IBC loading and unloading

MannTek DDC-M 50, FWS 50 PTFE

Marine bunkering and cargo hoses

ship to ship cargo transfer

ZVA Slimline 2 LA nozzle with LeverAssist hold-open aid

and Sight Glass SG 1 Al / Slimline dispensing hose

HD 50 C, HD 10 C

Yellow band aircraft refuelling hose and sensing hose

DCC Dry Cryogenic Coupling for LNG

Coupling process

UTS 50 hose assembly

with MannTek DDC Dry Disconnect Coupling; use eg. as road tanker hose for filling AdBlue petrol station tanks

Rubber Expansion Joint ERV-GS HNBR 80.16

YELLOW STEEL HNBR expansion joints for petroleum based products, DIN EN fuels up to 50 % aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Very good aging, weathering and ozone resistance. Temperature range (depending on medium) - 35° C up to + 100° C, temporarily up to + 120° C. Fire resistant to ISO 15540 up 30 min. at + 800° C. Electrically dissipative.

Camlock hose couplings: system comparison

Easyloc from Elaflex with automatically secured levers.

For long and heavy aviation refuelling hoses: Hose Beads 'BD' to EI 1522 standard

They notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

Unloading petroleum products at the service station (road tanker to UST)

Connection offset UST filling point: LG 3" hose assembly for gravity discharge, LTW 50 hose assembly for vapour balance

SX 50 SS

Spannfix clamp DN 50 of stainless steel

Bellows ERV-GR (Green Band) without flanges, with VSD vakuum support spiral

VSD: to increase vacuum resistance of a chosen ERV type. Open ring of stainless steel 1.4571

TW couplings with male BSP connection, one piece adapter

VK 50 - 11/2" AG SS, VK 50 -2" AG SS, TWK 50 - 2" AG SS

Storz Safety Couplings Type SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

ERV-G 400.10

DN 400

Oasis Fill Valves at CNG service station for buses

Manufacturing of turned parts

Camlock Cam Locking Coupling AMK 50 Ms (brass)

ZVA Slimline 2, dispenser

SSB 32, SSB 25, SSB16

Safety Swivel Breaks (SSB)

ZVA Slimline 2, black - top view

Solvent filling with integrated vapour recovery in the nozzle

ZVA 25 GR, UTS hose assemblies