Media Library / Images

Double Closing COAX Safety Break

CSB 21 DC

ZVA Slimline 2, guard 3, black scuffguard, blue colour sleeve

Lube oil plant: manifold with DDC-V Dry Disconnect Couplings

SG 1" 1x0 Al

Sight Glass, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

ERV-CR

"CR" Rubber Expansion Joints - installation in sewage plant

Oasis HC208 Quick Coupler, CNG loading

AMKC 50 SS

'Camlock' stainless steel steel coupler to EN 14420 - 7 with hose tail and Spannloc clamps

RS 1 x 11/2 SS

Reducer Female/Male

VK 80-2" AG Ms

TW male coupling brass, with reduced male BSP connection (special type)

Fuel grade identification for ZVA to standard

Attach with EK 145 Product Badge

SBS 250 - marine cargo hoses with built-in nipples

heavy standard bunkering hose to EN 1765, category S 15

Road tanker with open hose reel, HD hose assembly, ZV 500 nozzle

Hose with SC 50 SS Spannloc stainless steel clamps - corrosion protection against road salt

ZVA Slimline 2 GR with Sight Glass SG-COAX

SX 50 SS

Spannfix clamp DN 50 of stainless steel

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 ACME nozzle

Safety Swivel Break

SSB 25

Hose Trolley HTR-T

for terminal operations

LNG Refuelling

LNG Safety Break for installation on LNG dispensers SB-LNG FL-J

ELAFLEX Hamburg, testing electrical conductivity of hose assemblies

HD-C Neon

Simultaneous Refuelling/Filling of Diesel and AdBlue®

Picture 2

Oasis FV103 Fill Valve with extension, CNG dispenser

ELAFLEX Hamburg

Assembling ERV medium DN

V-St 50 SSE

Male threaded hose tail for assembling with Spannfix or Spannloc. Material: stainless steel with universally resistant PFA coating (red)

Unloading: MK couplers with DDC-V 80 adapter

ELAFLEX Hamburg

Hose assemblies, pressure test (hydrostatic test)

MK-A 80 SS, TW female coupler with Active Safeguard Lever, VB 80 SS

DDC-M 80 SS; SG 3", VC 75-3, Elaflon FEP 75, DDC-K 3" SS ADR

Epoxy resin loading with Dry Disconnect Coupling, sight glass and FEP universal hose. DDC cap with pressure relief at container tank outlet.

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Rubber Expansion Joint ERV-W 80.16

WHITE BAND expansion joints for foodstuffs, also containing oil and fat. Liner corresponds to Recommendation XXI of BfR and FDA-21CFR 177.2600. Not approved for drinking water. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically non-conductive.

NB-ZVF 50

Noozle Boots for ZVF 50 Overwing Nozzles