Media Library / Images

GasGuard LPG nozzle GG1E

eoconomic type for industrial refueling / attended refueling. Release volume on valve closure: 1,9 cm³.

H2 Hydrogen

H2 25 D Hydrogen hose, SFC 25, MX 25, VC 25

Elaflon Plus FEP 75, MK-A 80 SS

Loading and unloading of chemicals. TW coupling with active safeguard lever

SSB 16 Safety Break: Abriss

Oasis BV708, 1" ball valve / isolation valve, CNG fill post for trailer loading with HC200 Quick Coupler

Ship bunkering with LNG

DCC Dry Cryogenic Coupling with cap; CBC Cryogenic Breakaway Coupling

Elaflex LTW hose assembly, Matterhorn

Supply of the mountain top station via IBC unloading

Hose assemblies for the chemical industry

ERV-GR TA, UTL with DDC, FXD with male thread, Elaflon Plus FEP with foodstuff fitting, Elaflon PTFE with female thrad

Unloading chemical road tanker, Methanol

UTS hose assembly

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings, LPG hose assemblies. Vehicle side: DGC-V male couplings with flange

Anti-Kinking Spirals 'KSS' and 'KSS-SD'

The main bending stress area for hose assemblies is directly behind the coupling. To reinforce this area we developed the Anti-Kinking Spiral 'KSS': suitable for all ELAFLEX hoses, recommended for dynamically strong stressed universal hoses with thermoplastic linings

CBC-C

Cryogenic Breakaway Coupling for LNG with cable release: after release

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, red.

V 16-1" cr

Male ferrule hose coupling EN 14424, reusable. Slimline 16 hose, blue.

MK 50 SSE

TW female coupler. Material: stainless steel with universally resistant PFA coating (red)

Nozzle boot NB-ZVF 50

for ZVF 50 Oberflügel-Zapfventile

ZVA 25

HIFLO-Automatic nozzle DN 25 (1"), flowrate up to 140 litres/min.

ERV-R 100.16

RED BAND Rubber Expansion Joint for water, drinking water (DVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature range - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

Camlock hose couplings: system comparison

Easyloc from Elaflex with automatically secured levers.

ERV-G

with vacuum support spiral

ELAFLEX Hamburg

Assembling Spannfix hose clamps

Oasis FV103 Fill Valve, CNG service station

Transport protection for flanged fittings

Hose Reels electrical rewind system yellow

for water

Slimline 21 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

ELAPHARM Type EPH-OHM G

electrically conductive 'OHM/T', with light grey cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, black PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Camlock Cam Locking Coupling AMK 50 Ms (brass)

ZVA Slimline 2 for aircraft refuelling

black plastic cover (scuffguard), Sight Glass, dust cap and ground cable assembly

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

EA 866 scuffguard orange with ZVG 2 ACME nozzle

The scuffguard for LPG / Autogas nozzles shows the LPG fuel grade marking required by standard, and offers a large advertising space